Olympia Chimney Chimney Liner & Rebuild Nationwide

Olympia Chimney Chimney Liner & Rebuild in Torrington: What to Know First

An Olympia Chimney liner replacement or rebuild in Torrington usually runs $1,800 to $4,600 depending on flue length, access, and whether we’re doing a partial or full rebuild of the masonry. Most jobs take one to two days on site, and we’ll give you a firm price before any tool comes off the truck. This page is for Olympia Chimney owners in Torrington who want to know what their liner actually needs and what it’ll cost. Call (860) 744-2656 and Wendell Pike or one of his crew will walk you through it.

Call (860) 744-2656

We’re an independent Olympia Chimney service provider. That means we’ve installed and repaired plenty of their liners over the years, but we don’t answer to their corporate office. We answer to you, and to the 90-Day Done Right Promise we stamp on every job.

How Olympia Chimney Products Fail - and How We Fix Them

Olympia Chimney makes solid products, and we’ve installed enough of them to know where they hold up and where they don’t. Here’s what we actually see in Torrington chimneys:

• Olympia Ventis stainless liners and the rain-cap seam. The Ventis line is a workhorse, but the seam where the cap meets the liner body is the first place we find corrosion in Torrington. Litchfield County freeze-thaw cycles trap moisture there. We see pinholes forming at that seam within eight to twelve years on chimneys that don’t have a proper crown. The fix is usually a liner replacement with a heavier-gauge cap and re-sloping the crown so water runs off instead of pooling.
• Flexible liner sag at the smoke shelf. Olympia’s flexible stainless liners handle bends well, but when an original install didn’t use enough standoff spacers, the liner can sag and rub against the clay tile at the smoke shelf. We’ve pulled liners in Torrington’s East End neighborhood that were worn thin exactly there. You’ll hear a rattle or a dull thump when the wind hits the cap. A camera inspection confirms it. We replace the liner and space it properly so it can’t chafe.
• Deteriorated clay tile behind an Olympia liner. The liner protects the flue, but it doesn’t stop the outer masonry from soaking up water. When the original clay tile behind an Olympia liner has already spalled and shifted, you get gaps where heat and gas can pocket. A liner alone won’t fix that. We may need to do a partial rebuild of the throat and smoke shelf area, then reset the liner. This is common in Torrington homes built before 1970.
• Olympia rigid liner sections and bad mortar joints at the flue tile transition. Rigid sections are great for straight flues, but if the installer didn’t seal the transition where the rigid liner meets the flue tile, you get condensation running down the outside of the liner. That rusts the stainless from the outside in. We find it during camera inspections, usually near the first elbow above the firebox. Seal it, replace the affected section, and you’re good.
• Flue tile and brick movement after liner install. Sometimes the liner is fine and the chimney itself is the problem. We’ve seen Torrington chimneys where the masonry shifted enough to crack the Olympia liner at the top plate. That’s a rebuild job: tear down the top three to five courses, reset the liner, rebuild with new brick, pour a new crown. A liner alone won’t hold if the structure it sits in is moving.

Our Olympia Chimney Chimney Liner & Rebuild Process

1. 1
   You call, we talk. A live person answers, maybe Wendell himself. We ask about your setup, your symptoms, and how old the chimney is. You get a straight answer about what it might be. No script, no call center.
2. 2
   We come out and look. We run a camera down the flue. You see what we see, in real time. If it doesn’t need doing, Wendell will tell you that too.
3. 3
   We write a firm price. Parts decision is honest: if the Olympia liner section needs replacing, we’ll quote OEM or a quality aftermarket match and tell you the difference. We don’t pad the bill either way.
4. 4
   We do the work. Liner replacement, partial rebuild, full rebuild - whatever the camera showed. We protect the roof, keep the jobsite clean, and respect your house like it’s on our street.
5. 5
   We test it. Draw test, draft check, visual inspection of every connection. If it doesn’t breathe right, we don’t leave until it does.
6. 6
   You get the promise in writing. 90-Day Done Right Promise on every job. One call brings us back, no charge, if anything’s not right.

What Olympia Chimney Chimney Liner & Rebuild Costs in Torrington

These are real numbers from Torrington jobs, not national averages pulled from a website:

• Flexible stainless liner replacement (Olympia-compatible): $1,800-$3,200. Single story, straight flue, no masonry repair needed.
• Rigid liner section replacement: $900-$2,100. One or two sections, access from the roof, crown in decent shape.
• Partial rebuild (top courses, crown, liner reset): $2,800-$4,600. Includes new crown, flashing, and liner re-attach.
• Full chimney rebuild: $6,000-$14,000. From roofline up or more, depending on height and brick match.

What moves the price: chimney height, roof pitch, whether we need scaffolding, brick-matching difficulty, and liner condition. A two-story steep-roof chimney costs more than a single-story walkable. And if the crown’s shot, we do both at once - it’s cheaper than revisiting in two years.

Every quote is free and in writing, with the number you get on the phone being the number on the invoice. Call (860) 744-2656 for a firm estimate.

Why Torrington Homeowners Call Top Hat Chimney for Olympia Chimney Work

We’ve been doing this since 1999, and Wendell has been on more rooftops in Torrington than he can count - including plenty in the East End. He knows the difference between a chimney that needs a sweep and one that needs a rebuild, and he’ll tell you straight. That’s the whole point and the reason people keep calling.

The 90-Day Done Right Promise is in writing on every job. The phones are answered by a live person around the clock. The price you’re quoted over the phone is the price on the invoice. And if your Olympia Chimney liner is beyond repair and a different brand makes more sense, we also work with DuraFlex, HeatShield, and Gelco - so we’re not married to one shelf in the warehouse. We’re married to the right fix for your flue.

We’re locally owned and owner-operated. Wendell’s name is on the work, his published address is real, and you’ll run into him again in town. That’s how it should be.

FAQs